UltraVNC 1.0.4 RC17

UltraVNC Team - (Open Source)

Troubleshooting becomes very easy with UltraVNC as it allows to remotely control a computer from another on using the Internet connection.

UltraVNC is an easy to use computer program that can display the screen of another computer (via internet or network ) on another screen.

The software consists of a server and a viewer. It is very useful for IT support as user easily accesses his customer's computer from anywhere in the world and remotely solve the technical issues that occurred without being necessary the installation of the software on the clientâ€™s computer. One of the main features of this solution VNC is its much higher reactivity with existing tools.

UltraVNC essential features include a Video Driver Mirror, an optional encryption module, integrated Windows authentication with a domain and Active Directory, File Transfer, emulating mouse and keyboard and communication window Discussion.

Title:: UltraVNC 1.0.4 RC17
File Size:: 2.1 MB
Requirements:: Windows 2000 / XP / Vista / Windows7 / XP64 / Vista64 / Windows7 64 / Windows8 / Windows8 64
Language:: en-us
License:: Open Source
Date Added:: 03 Aug 2008
Publisher:: UltraVNC Team
Homepage:: http://ultravnc.sourceforge.net
MD5 Checksum:: B6E75C2251AF61D9E9AFC06742419DD9

**Update 3 aug
- Exceptions thrown with no message cause access violations when Report called.
- All message boxes are now properly parented to the viewer window so that they are modal. We ran into quite a few that ended up behind the main window, or behind the file transfer windows
- Socket timeouts are now used during file transfer so that connections lost while connected to a repeater are detected (We have a multistage repeater chain (server -> repeater -> repeater-> repeater -> viewer that doens't reliably tear down connections on network failure. Don't ask ;) )
- A small keepalive message is sent every 5 seconds after receiving a file chunk to keep the server or viewer from timing out during a read. This is necessary because there's no flow control in the FT protocol. I didn't notice a decrease in throughput. Keepalive support is negotiated between viewer and server. Should be fully backwards compatible, though I suppose if the viewer doens't want keepalives, the server should not use the socket timeouts.
- The prompt for exit is now respects the m_fExitCheck setting if the 'x' in the full screen titlebar is clicked
- Another big change to the file transfer module is that a temporary file is used to hold the file being transferred. When it is successfully completes, it is moved to the original file name -- resume still works too. This was because when a file transfer is interrupted, a user (ie, service tech) can't tell if the file is complete.
- The close button on the file transfer dialog is now enabled and disabled during file transfers. You can't close the window with the 'x' during a transfer, but you can otherwise
- Many variables are now properly initialized.
- The black layered window is now brought to the top every 20ms -- the start menu is still visible on the remote system so this change makes it go away faster. It's not a good fix but I couldn't find a better way with the time I had.
- You can now register the service with a custom name.
- Simplified Copy_to_temp and copy_to_secure_from_temp
- When the network connection is lost, a message is shown "Connection lost due to communication failure" instead of "writeexact: socket error while writing"
- socket read/write errors now break the while (connected) loop in vncclient.cpp
- Simplified file handle cleanup
- FT crash fix, lock screeen while transfer
- quickoption fix: Was not saved correct